Experiment of Green Laser Pointer from Laserto.com

Wow, it must be a wonderful time to do experiment with green laser pointer in various ways. You would just consider it a funny loan to do conduce experiment with green laser pointer. Paying high attention of safety knowledge while continue experiment.

Lighting matches

It will be a hard job to do once the output power is less than 100Mw. During the process, you’d better choose an IR filter green laser pointer with an output power no less than 100Mw. During the process of experiment, you should make sure that the beam dot should always point at the black head of the match so that the black head can absorb enough energy until burning. Make sure the laser pointer and matches are all mixed and not moving. Besides, remember keeping certain distance from the match, or you will get ash and debris on the lens of laser pointers.

Popping balloons

A laser pointer with an output power of about 75mW or higher will be enough to pop balloons. Since dark colors and ideal black color are much easier to absorb enough energy, black color balloons are certainly the best choice. If you don’t have a black laser pointer, you can use a sharpie to put a dark spot the balloon that you laser pointer can point at. You should make sure the laser pointer beam is not moving and focusing on the black spot so that you can make a quick pop.

Cutting electric tape

It will be a difficult experiment to cut black electric tapes via a green laser pointer with an output power of no less than 95Mw. You should always keep the laser beam steady and point at the edge of the tape. Make the tapes suspended under certain objects so that the tape roll will create enough tensions which can make cutting of electric tapes much easier.

During the process of the laser pointer experiment, you should have a careful attention to the output power. Keep eyes safety and not point the laser pointer near the area where air craft might appear.